SM-01(2%)


Surakhan Digital Salimeter

SM-01 (measure 2%)



Surakan Digital Salinity Measuring Instrument, device for measuring the saltiness of soup items,
is a product to help improve the eating habits of those who are suffering from adult diseases as well as general people.
We hope you can make a delicious meal while keeping the health of your family by measuring the salinity of your food.


Surakhan Digital Salimeter

SM-01 (measure 2%)



Surakan Digital Salinity Measuring Instrument, device for measuring the saltiness of soup items,
is a product to help improve the eating habits of those who are suffering from adult diseases as well as general people.
We hope you can make a delicious meal while keeping the health of your family by measuring the salinity of your food.

Product Specification


Model Name Surakhan Digital Salimeter SM-01

Measurement PrincipleMeasuring method of electrical conductivity

Measuring Range
Salinity - Measure from 0% to 1.9% (Accuracy +/- 0.2%)
Temperature - Measure from 0℃ to 100℃ (Margin of error +/- 2℃)

DisplayLCD method

, sensoPlatinum Plating Center

Power3V CR2032 Battery

WaterproofWater resistance

Size Product - 185x32.2x15.4mm | LCD - 29.5x17.2mm

Material ABS / Silicon

Product Features



Due to its simple design

Clean appearance, and as a salimeter with practical buttons, it is perfect as an interior decoration for the kitchen.


Silicon Material

It is made out of silicon, which is a soft material.
So, it is easy to clean and wash the corners, which are hard to wash, compared to plastic material.


Water Resistance Function

Due to its water resistance function, it is suitable for places where there is a lot of water use.
It can be used anywhere, such as the laboratories, cafeterias, restaurants, and etc.


Comfortable way of measuring

If you place the sensor in the food, without any operation,
it measures the salinity and the temperate at the same time.
With the HOLD button, you are able to fix the measured temperature
and salinity as well as in hot boiling water.


Spoon Shaped Silicon Detachable

You can measure with the soup inside the spoon if you attach the spoon-shaped silicon on the stick type.
Spoon-type silicon can be attached and used according to the method of use and need.

Measurement Method


1
Remove the silicon plug and check the cleanliness of the sensor.
If the sensor is not clean, wash the sensor part with water and wipe it with a soft cloth.
2
Press the power (ON / OFF) switch to turn on the screen.
If the power does not turn on, the battery is discharged and needs replacement.
When replacing the battery, refer to the battery replacement section at the bottom.
3
Concentration (%) and temperature are measured when the food touches the sensor.
Place the sensor for a sufficient amount of time
and read the display value after letting it adapt to the food.
Pressing the HOLD button fixes the measured value, which makes it easier to read.
4
When the measurement is finished, press the power switch to turn off the screen.
Wash the sensor part by using a neutral detergent
and water, then wipe it with a soft cloth,
and put on the silicon plug before storage.


*Reference Details for Measuring

  • When you immerse the sensor, please measure 1 ~ 2cm away from the floor and the wall, also avoid any contact with the wall or solid ingredients.
  • If there is contact with a solid ingredient, the measurement error will vary.
  • Measurement of food containing a lot of oil may cause the oil film to appear on the surface of the sensor, which may indicate a lower salinity value than the actual value.
  • When the soup is being boiled, the temperature may continuously change, someasurement may be unstable.
    In that case, turn off the fire and then measure.

Battery replacement


Precautions

1. After use, wash the sensor part with water and neutral detergent, and then wipe it with a soft cloth. Do not wipe the sensor part with rough loofah because it is plated.
2. When it is immersed in boiling water, please immerse only the silicon material part and be careful not to apply high heat to the body part as much as possible.
3. Since it is water resistant, you can wash it under flowing water; however, do not completely immerse it in water.
4. Place sensor protecting silicon plug on before storage and keep it out of the reach of children.
5. Be aware of the problems that may occur due to strong impact, which can damage the product and the water resistance function.
6. Avoid storage in a place exposed to high humidity, high temperature or direct sunlight.
7. Do not disassemble or modify this product.